巢湖学院学报 ›› 2021, Vol. 23 ›› Issue (6): 8-14+30.doi: 10.12152/j.issn.1672-2868.2021.06.002

• 环巢湖研究 • 上一篇    下一篇

一株嗜热地衣芽孢杆菌的分离及产纤维素酶特性研究 

张凤琴:巢湖学院 化学与材料工程学院
  

  1. 巢湖学院 化学与材料工程学院安徽 巢湖 238024
  • 收稿日期:2021-06-22 出版日期:2021-11-25 发布日期:2022-03-05
  • 作者简介:张凤琴(1985—),女,安徽安庆人,巢湖学院化学与材料工程学院讲师,主要从事发酵工程、生物制药研究。
  • 基金资助:
    巢湖学院科学研究项目项目编号:XLY-201712);巢湖学院食品科学与工程校级重点建设学科

Isolation and Cellulase Production Characteristics of One Thermophilic Geobacillus

ZHANG Feng-qin :School of Chemistry and Material Engineering, Chaohu University   

  1. School of Chemistry and Material Engineering, Chaohu University, Chaohu Anhui 238024
  • Received:2021-06-22 Online:2021-11-25 Published:2022-03-05
  • About author:ZHANG Feng-qin :School of Chemistry and Material Engineering, Chaohu University
  • Supported by:

摘要: 目的 从安徽庐江汤池温泉中分离得到一株嗜热菌通过分子生物学手段对其进行鉴定研究其形态特征和生长特性并对其产纤维素酶条件进行优化研究可为其在今后的生物科学研究和工业应用方面提供一定的参考。 通过高温培养筛选分离又得到一株嗜热菌测定其 16S rDNA 基因序列经过比对序列和构建系统发育树及菌体和菌落形态的观察确定其分类学地位并研究其生长特性通过研究接种龄发酵培养基初始 pH接种量发酵温度转速和发酵时间等因素对产纤维素酶的影响初步优化产纤维素酶的条件结果 从庐江汤池温泉水中又筛选分离得到一株嗜热菌将其命名为 LJTC-2该菌为革兰氏阳性菌呈杆状属于地芽孢杆菌属最高耐受 73°C最适生长pH7.0 左右菌株 LJTC-2 产纤维素酶的最佳条件初步确定为接种龄为 36 h发酵培养基初始pH6.0接种量 2%发酵温度为 60°C转速为 180 r-min-1发酵时间为 60 h酶活力最高183 mU.mL-1比优化前提高了 17%结论 LJTC-2 菌株是地衣芽孢杆菌能耐受 73摄氏度高温初步确定菌株 LJTC-2 在接种龄为 36 h发酵培养基初始 pH6.0接种量 2%60°C180 r.min-1 的条件下发酵60 h,纤维素酶酶活最高。

关键词: 汤池温泉, 嗜热菌, 地衣芽孢杆菌, 分离鉴定, 产纤维素酶特性

Abstract: [Objective] One thermophilic bacterium was isolated from the hot spring in Tangchi, Lujiang, Anhui,and identified by molecular biological methods to study its morphological, physiological and growth characteristics,and the conditions of cellulase production were optimized. This study can provide reference for its biological science research and industrial application in the future. [Methods] Another thermophilic bacterium was isolated by high temperature culture, and its 16S rDNA gene sequence was determined. Its taxonomic status was determined by sequence alignment, phylogenetic tree construction and observation of cell and colony morphology. And its growth characteristics were studied. Through study of the effects of inoculum age, initial pH of fermentation medium, inoculum amount, fermentation temperature, rotation speed and fermentation time on cellulase production the cellulase production conditions were preliminarily optimized. [Results] Another thermophilic bacterium was isolated from the hot spring in Tangchi, Lujiang for the first time, which was named LJTC-2. The bacterium was Gram-positive and rod-shaped, belonging to Geobacillus. Its highest tolerance temperature was 73 °C and its optimum growth pH was about 7.0. The optimal fermentation conditions of LJTC-2 for cellulase production were determined as follows: inoculation age of 36 h, initial pH of fermentation medium of 6, inoculation amount of 2%, fermentation temperature of 60 °C, rotation speed of 180 r.min-1, fermentation time of 60 h. Under these conditions, the enzyme activity was 183 mU.mL-1, which was 17% higher than that before optimization. [Conclusion] The strain LJTC-2 was Geobacillus, and could tolerate high temperature of 73 °C. The results showed that LJTC-2 had the highest cellulase activity under the conditions of inoculation age of 36 h, initial pH of fermentation medium of 6, inoculation amount of 2%, 60°C , 180 .min-1 and fermentation time of 60 h.

Key words: hot spring in Tangchi, thermophilic bacteria, geobacillus, separation and identification, cellulase production characteristics

中图分类号: 

  • TQ93