巢湖学院学报 ›› 2023, Vol. 25 ›› Issue (6): 129-132.doi: 10.12152/j.issn.1672-2868.2023.06.017
• 工程与技术 • 上一篇 下一篇
郑祥，樊洋洋，丁凯，等：巢湖学院 机械工程学院
收稿日期:
出版日期:
发布日期:
作者简介:
基金资助:
ZHENG Xiang，FAN Yang-yang，DING Kai，et al:School of Mechanical Engineering, Chaohu University
Received:
Online:
Published:
摘要： 以刮板输送机的尾轴为研究对象，利用有限元分析软件ANSYS对其进行静态特性分析及动态特性分析。在静态分析结果的基础上，通过nCode DesignLife软件对尾轴进行疲劳特性分析，确定了尾轴寿命不安全区域的位置，为刮板输送机的进一步优化提供了理论参考。
关键词: 刮板输送机, 静态特性, 动态特性, 疲劳特性
Abstract: This article takes the tail shaft of the scraper conveyor as the research object, and uses the finite element analysis software ANSYS to analyze its static and dynamic characteristics. On the basis of the static analysis results, the fatigue characteristics of the tail shaft are analyzed using nCode DesignLife software, and the location of the unsafe area of the tail shaft life is determined, providing theoretical reference for further optimization of the scraper conveyor.
Key words: scraper conveyor, static characteristics, dynamic characteristics, fatigue characteristics
中图分类号:
郑祥, 樊洋洋, 丁凯, 等. 刮板输送机尾轴性能及疲劳特性分析[J]. 巢湖学院学报, 2023, 25(6): 129-132.
ZHENG Xiang, FAN Yang-yang, DING Kai, et al. Analysis on the Performance and Fatigue Characteristics of the Tail Shaft of Scraper Conveyer[J]. Journal of Chaohu University, 2023, 25(6): 129-132.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://xb.chu.edu.cn/CN/10.12152/j.issn.1672-2868.2023.06.017
http://xb.chu.edu.cn/CN/Y2023/V25/I6/129
Cited
